Do You Have Any Questions?Toll-free (in the US): 1-866-ENDEVCO
Fax: 1-716-684-0987
Contact Endevco We found 27 matches.... Accessories, Triaxial mounting block for 7264B
Accelerometer, PR, 2,000 g, undamped, screw mount, 25 ft cable, 10V excitation
Accelerometer, PR, 2,000 g, undamped, screw mount, 15 ft cable, 10V excitation
Accelerometer, PR, 2,000 g, undamped, screw mount, 30 ft cable, 10V excitation
Accelerometer, PR, 2,000 g, undamped, screw mount, 1% transverse sensitivity, 25 ft cable, 10V excitation
Accelerometer, PR, 2,000 g, undamped, screw mount, 1% transverse sensitivity, 30 ft cable, 10V excitation
Accelerometer, PR, 500 g, undamped, screw mount, 25 ft cable, 10V excitation
500 g, undamped, screw mount, 50 ft cable, 10V excitation
Accelerometer, PR, 500 g, undamped, screw mount, 1% transverse sensitivity, 25 ft cable, 10V excitation
Accelerometer, PR, 500 g, undamped, screw mount, 1% transverse sensitivity, 15 ft cable, 10V excitation
Accelerometer, PR, 500 g, undamped, screw mount, 1% transverse sensitivity, 30 ft cable, 10V excitation
Accelerometer, PR, 500 g, undamped, screw mount, 1% transverse sensitivity, 35 ft cable, 10V excitation
Accelerometer, PR, 2,000 g, undamped, screw mount, 25 ft cable, 5V excitation
Accelerometer, PR, 2,000 g, undamped, screw mount, 1% transverse sensitivity, 25 ft cable, 5V excitation
2,000 g, undamped, screw mount, 30 ft cable, 5V excitation
Accelerometer, PR, 500 g, undamped, screw mount, 1% transverse sensitivity, 25 ft cable, 5V excitation
Model 7264B Piezoresistive Accelerometer
IM7264B, Revision D
The Model 7264B is a low mass, miniature piezoresistive accelerometer. Because of its small size, certain
precautions must be observed when handling and mounting the accelerometer to avoid damaging the
unit.
Materials Required IM7264B-Rev-D
Piezoresistive accelerometer
Model 7264B
ENDEVCO www.endevco.com Tel: +1 (866) ENDEVCO [+1 (8
Piezoresistive accelerometer
Model 7264B
ENDEVCO www.endevco.com Tel: +1 (866) ENDEVCO [+1 (8
START
MOUNTING LOCATION VEHICLE
NUMBER
OF AXIS?
SINGLE TRIAXIAL
DAMPED DAMPED
713AL
713FL
757AH
757
START
MONTAGEORT FAHRZEUG
ANZAL DER
MESSACHSEN
UNIAXIAL TRIAXIAL
GEDÄMPFT
713
713F
757AH
757FH
MIN
tion, 7264B, 7264C, 7264H) therefore the damage to one of the bridge arms will result in substantial resistance increases that may be different for the transducer's input and output impedance measurement values.
Sensing solutions for
automotive safety testing
Since the earliest days of vehicle safety testing,
HOCHWERTIGE MESSTECHNIK
UND BERATUNG AUS EINER HAND
Sensorik für
Fahrzeugsicherheitstests
Von Begi
model 7264B should be within 300 to 900 Ω. If your sensor
measures outside these specifications, there is reason to suspect your sensor has been damaged.
Further, the original calibration certificate that came with the sensor contains the actual input and
output resistances. Field measurements EDV-TP-341
TEST & MEASUREMENT
SENSOR CATALOG
EXTREME
ENVIRONMENTS
Accelerometers
Pressure transducers
Signa
|