Do You Have Any Questions?

Toll-free (in the US): 1-866-ENDEVCO
Fax: 1-716-684-0987
Contact Endevco

We found 11 matches....
Model: 26574

Model: 26574

2-socket 7/16-27 UNS-2B plug assembly, used on the 6917B (conductor insulation OD <0.081", accepts 20-22 awg)

    Model: 6917B/060

    Model: 6917B/060

    Low noise, twisted pair, PTFE cable, 60-in, 2-socket 7/16-27 UNS-2B plug to pigtails

      Model: 6917B/120

      Model: 6917B/120

      Low noise, twisted pair, PTFE cable, 120-in, 2-socket 7/16-27 UNS-2B plug to pigtails

        Model: 6917B/240

        Model: 6917B/240

        Low noise, twisted pair, PTFE cable, 240-in, 2-socket 7/16-27 UNS-2B plug to pigtails

          Model: 6917B/360

          Model: 6917B/360

          Low noise, twisted pair, PTFE cable, 360-in, 2-socket 7/16-27 UNS-2B plug to pigtails

            Model: 6917B/396

            Model: 6917B/396

            Low noise, twisted pair, PTFE cable, 396-in, 2-socket 7/16-27 UNS-2B plug to pigtails

              Model: 6917B/600

              Model: 6917B/600

              Low noise, twisted pair, PTFE cable, 600-in, 2-socket 7/16-27 UNS-2B plug to pigtails

                
	6917B connector replacement guide

                6917B connector replacement guide

                r the 6917B cable with the replacement connector, 26574? Answer Assembly instructions are as follows: 1. Squarely cut through the cable at the end to be repaired. Strip the outer red ETFE insulation 0.5 inches and trim the shield as close as possible to the insulation. Remove all black low-noise t

                
	Assembly Endevco 6634C

                Assembly Endevco 6634C

                Assembly instructions for Endevco model 6634C

                
	Accelerometer cable connector repair

                Accelerometer cable connector repair

                model 6917B. This cable assembly typically connects to Endevco's accelerometer models 6222S and 6233C. The replacement connector part number is 26574. Part Number 26574 Connector to cable assembly instructions: Cut through and remove the outer ETFE Jacket and inner braided shield to expo

                edv-catalog_lowres.pdf

                edv-catalog_lowres.pdf

                en-US TE S T & ME A S UREMENT en-US SENSOR CA T ALOG en-US EXTREME en-US ENVIRONME